Thursday, May 18, 2017

Voisin 35 Parts Cleaning Moving Forward






On March 29,2017, I began more refined fabric and tape removal from a wing section Corey brought up from the Hangar.

 I proceeded onto the tail section on April 3,2017, to remove fabric;  providing time support. My efforts  will allow Corey to focus on wing modifications.






I found a weakness to pierce the fabric as I followed along the hollow just under the frame.






As you can see I was able to loosen the tail covering in it's entirety - to
preserve for Corey's personal archives the N# flown by his initial proto-type...renewing it for modification number two.







A cleaned frame ready for a fresh application of fabric.
















Time to get this tail in order.







Each section became a little easier to clean, because I developed a method of my own.

I didn't need to strip it in a bunch of tiny pieces, but managed to pull off entire sections with well placed cuts and a bit of opposing power.





Next came the upper and lower left ailerons ,with both the upper and lower right ailerons to follow at a later date.









Due to my skill level I've pretty much accomplished all I'll be able to do alone for now.




 Corey has ordered some stainless steel cable, 3M Fastbond Contact Adhesive 30NF Green Glue and Aircraft Spruce has come through with some smaller parts  for the Voisin 35 at the present time.

We will be getting the order in for fabric and looking for a re-drive to to get the Geo Engine placed back in position to power-up.

Next post will show a few pictures of Corey's reworking of the wings...

Until then Have a Great Day!

Monday, May 8, 2017

The New Windsock Takes Air







Saturday morning it was time to take the Windsock frame off the hangar to get Corey's new one strapped into place.

Having the Windsock keeps an eye to the sky attitude...Good for a Pilot's altitude.






Almost all tied up!

As our luck would have it we needed to wait until the next day to get the windsock back on top of the Hangar due to a windspeed increase. The stability of trying to lift the frame pole against the drag of the wind would be impossible.







Success!

The Sunday afternoon winds were almost nothing coming over the warming ground of the bean fields.

We...I use the term loosely since I was the camera woman in command of documentation, got the Windsock up and filled with air.

Now, we can watch wind speed and direction, instead of an empty frame, that had become a perch to a few different species of birds.

Oh, and may I add? It adds color to the landscape in contrast to the soon to be rising  crops.

Beautiful!